(˚C) – The temperature which the material will reach during the extrusion However, the settings for other materials than those produced by Zortrax can be still adjusted differently, according to specific requirements. The default values for each setting are the most recommended for the selected material type. If you’ve decided to apply non-Zortrax materials, use Advanced Settings and change the material group to “External Materials” while preparing the model in Z-SUITE.įirst of all, you have to choose the base material that’s going to be used from the dropdown list – Material type. The printer will adjust the fan speed accordingly. We recommend leaving the default option – AUTO.
Cooling is not useful for big prints without any thin parts, whereas high cooling is better for small and thin prints. PRINT COOLING – You can choose the fan speed which cools down the model that is being printed. Support lite consumes less material and it is easier to remove. SUPPORT LITE – Choose this option to generate the support structure without the outer perimiter. It means that for all hanging parts of the model the support structure is generated at a 20° angle. SUPPORT – Select the angle at which the support structure is generated. But the larger infill, the more time and material is needed for such a print. MAXIMUM infill allows printing with the highest strength level. All four types of infill are presented in the picture on the right.
Infill: choose the model infill: MAXIMUM/HIGH/MEDIUM/LOW. Models with HIGH option take more time to be printed but are of better quality. High quality gives better looking prints but increases the printing time. Finer layers provide better surface quality but make printing more time- and material-consuming. Layer thickness: choose the height of one layer: 0,09mm/0,14mm/0,19mm/0,29mm/0,39mm (depending on the material). This section lists keyboard shortcuts which you can use with Z-SUITE to make your work easier and faster: ctrl/cmd + ]Īdd the previous model to the selected oneįit the workspace view to the selected model
0 kommentar(er)
